24Vdc 185W MEAN WELL IP67 Waterproof LED Single Output Switching Power Supply
HLG- 185H series is a 185W AC/DC LED driver featuring the dual mode constant voltage and current output. HLG-185H operates from 90～305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 94%, with the fanless design, the entire series is able to operate for -40℃ ~ +90℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-185H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
Features:
1. Universal AC input / Full range (up to 305V AC)
2. Built-in active PFC function
3. High efficiency up to 94%
4. Protections: short circuit / over current / over voltage/ over temperature
5. Cooling by free air convection
7. Function options: Ouput adjustable through potentiometer;
8. IP67 / IP65 design for inddor or outdoor installatons
9. three in one dimming function (0~10Vdc or PWM signal or resistance)
10. suitable for lED lighting adn stret lighting applications
11. 7 Years warranty (Note 10)
Applications:
1. LED Street lighting
2. LED High bay lighting
3. parking space lighting
4. LED fishing lamp
5. LED greenhouse lighting
6. Type "HL" for use in class I, division 2 hazardous (Classified) location.
Technical Specificaiton:
| MODEL | HLG-185H-12□ | HLG-185H-15□ | HLG-185H-24□ | HLG-185H-36□ |
| OUTPUT | DC VOLTAGE | 12V | 15V | 24V | 36V |
| Constant Current Region (Note 4) | 6~12V | 7.5~15V | 12~24V | 18~36V |
| RATED CURRENT | 13A | 11.5A | 7.8A | 5.2A |
| RATED POWER | 156W | 172.5W | 187.2W | 187.2W |
| RIPPLE&NOISE(max.) Note.2 | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p |
| VOLTAGE ADJ. RANGE (Adjustable for A-Type only (via built-in potentiometer)) | 10.8 ~ 13.5V | 13.5 ~ 17V | 22 ~ 27V | 33 ~ 40V |
| CURRENT ADJ. RANGE (Adjustable for A-Type only (via built-in potentiometer)) | 6.5 ~ 13A | 5.75 ~ 11.5A | 3.9 ~ 7.8A | 2.6 ~ 5.2A |
| VOLTAGE TOLERANCE | ±2.5% | ±2.0% | ±1.0% | ±1.0% |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| LOAD REGULATION | ±2.0% | ±1.0% | ±0.5% | ±0.5% |
| SETUP,RISE TIME Note. 6 | 1000ms,200ms/115VAC 500ms,200ms/230VAC |
| HOLD UP TIME(Typ.) | 16ms / 115VAC, 230VAC |
| INPUT | VOLTAGE RANGE | 90 ~ 305VAC 127 ~ 431VDC
(Please refer to "STATIC CHARACTERISTIC" section) |
| FREQUENCY RANGE | 47~63Hz |
| POWER FACTOR(Typ.) | PF≧0.98/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC @ full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) |
| EFFICIENCY (Typ.) | 91.5% | 92% | 93.5% | 94% |
| AC CURRENT (Typ.) | 12V: 1.8A / 115VAC 0.8A / 230VAC 0.7A / 277VAC 15V~54V: 2.1A / 115VAC 0.9A / 230VAC 0.8A / 277VAC |
| INRUSH CURRENT (Typ.) | COLD START 65A(twidth=445μ s measured at 50% Ipeak) at 230VAC; Per NEMA 410 |
MAX. No. of PSUs on 16A
CIRCUIT BREAKER | 4 units (circuit breaker of type B) / 7 units (circuit breaker of type C) at 230VAC |
| LEAKAGE CURRENT | <0.75mA / 277VAC |
| PROTECTION | OVER CURRENT | 95 ~ 108% |
| Constant current limiting, recovers automatically after fault condition is removed |
| SHORT CIRCUIT | Constant current limiting, recovers automatically after fault condition is removed |
| OVER VOLTAGE | 14 ~ 17V | 18 ~ 21V | 28 ~ 34V | 41 ~ 46V |
| Shut down o/p voltage with auto-recovery or re-power on to recovery |
| OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after temperature goes down |
| ENVIRONMENT | WORKING TEMP. | Tcase= -40 ~ +90℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) |
| MAX. CASE TEMP | Tcase= +90℃ |
| WORKING HUMIDITY | 20~95% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -40~+85℃, 10~95% RH |
| TEMP. COEFFICIENT | ±0.03% / ℃ (0~50℃) |
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| SAFETY | SAFTY STANDARDS | UL8750(type”HL”), CSA C22.2 No. 250.0-08; TUV EN61347-1, EN61347-2-13 independent;gb19510, GB19510.14 IP65 or IP67; J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1 |
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH |
| EMC EMISSION | Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (@ load≧50%) ; EN61000-3-3. GB17743, and GB17625.1 |
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV) |
| OTHERS | MTBF | 192.2K hrs min. MIL-HDBK-217F (25℃) |
| DIMENSION | 228*68*38.8mm (L*W*H) |
| PACKING | 1.15Kg; 12pcs/14.8Kg/0.8CUFT |
| NOTE |  |
For more detail specification, please contact us to get the specification in PDF file.Thanks!
