CL-DALI-150-12-F1M1 12VDC 150W Output DALI / PUSH DIM CV DALI Dimmable Driver 110 ~ 240Vac Input
COMI LIGHTING's Intelligent dimmable led driver have excellent performance:
- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard
Features and Benefits:
1. Dimming interface: DALI, Push Dim
2. PWM digital dimming, no alter LED color rendering index.
3. Standard DALI logarithmic dimming curve.
4. Dimming range from 0-100%, LED start at 0.1% possible.
5. Power factor > 0.99, Efficiency > 91%.
6. Short circuit / Over-heat / Over load / Over voltage protection.
7. DALI bus standard: IEC62386-101, 102, 207.
8. Compliant with Safety Extra Low Voltage standard.
9. Suitable for indoor environments.
Main Charicteristics:
| Dimming Interface | DALI (IEC62386), Push DIM |
| Input Voltage Range | 100-240Vac ±10% |
| Frequency | 50/60Hz |
| Input Current | 115Vac≤1.95A, 230Vac≤0.8A |
| Power Factor | PF>0.99/115Vac , PF>0.95/230Vac, at full load |
| THD | <5% at 115Vac, <8% at 230Vac, at full load |
| Efficiency | >91% |
| Inrush Current(typ.) | Cold start 60A at 230Vac |
| Control Surge Capability | L-N: 1kV L/N-G: 2kV |
| Leakage Current | I/P-O/P: <0.5mA/230Vac, I/P-GND: <0.75mA/230Vac |
| Output Current | Max. 12.5A |
| Output Voltage | 12Vdc |
| Output Voltage Range | 12Vdc ±0.5Vdc |
| Ripple & Noise | ≤200mV |
| Output Power | Max. 150W |
| Output Power Range | 1~150W |
| Overload Power Limitation | ≥102%~125% |
| Dimming Range | 0~100%, LED start at 0.1% possible. |
| PWM Frequency | 2KHz~4KHz |
| Working Temperature | tc: 85°C ta: -30°C ~ 60°C |
| Working Humidity | 20 ~ 95%RH, non-condensing |
| Storage Temp., Humidity | -40 ~ 80°C, 10~95%RH |
| Temp. Coefficient | ±0.03%/°C(0-50°C) |
| Vibration | 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes |
| Dimension | 273×57×37mm(L×W×H) |
| Packing | 278×59×42mm(L×W×H) |
| G.W. | 790g±10g |
Protections:
| Over-heat Protection | Shut down the output when PCB temp.≥110°C, auto recovers when temp. back to normal |
| Over Voltage Protection | Shut down the output when non-load voltage ≥13~18V, re-power on to recover after fault condition is removed. |
| Over Load Protection | Shut down the output when current load≥102% ~125%, auto recovers when the load is reduced |
| Short Circuit Protection | Shut down automatically if short circuit occurs, auto recovers after faulty condition is removed |
Safety and EMC:
| Withstand Voltage | I/P-O/P: 3750Vac I/P-GND: 1800Vac |
| Isolation Resistance | I/P-O/P: 100MΩ/500VDC/25°C/70%RH |
| Safety Standards | IEC/EN61347-1, IEC/EN61347-2-13 |
| EMC Emission | EN55015, EN61000-3-2 Class C, IEC61000-3-3 |
| EMC Immunity | EN61000-4-2,3,4,5,6,8,11, EN61547 |
Product Size:
Typical Wiring Diagram:
