LED Shoebox Light Arm Mount 240W To 320W, 130lumen per watt replacing 400W to 1000W HPS/MH Bulbs Equiv,the ideal replacement for Induction lamp,metal halide or HID lamp,pure aluminum heat sink,for Homedepot parking lot,Lows Parking lot,Roadway and other places that may need lighting.
Features and Benefits:
1. It’s major to replace the 400Watt to 1000Watt Shoebox replace traditional MH/HID/HPS/CFL lamp to New fixtures
2. Precision Die Cast Aluminum Housing
3. Fade Resistant Powder Coat Finish
4. Energy saving up to 70%-80%
5. Wide colour availability in degrees
6. 50,000 hours, 5 Years Warranty
7. It is an ideal replacement for Induction lamp, metal halide or HID lamp
8. UL listed power supply
9. Wireless Dimming Controlling LED Lighting System Optional.
10. California new policy request the shoebox have to need 3 step dimming with sensor in 2017 which with 20%/50%75%/100% wireless remote control.
About Optional Dimming Function:
(1)3-step dimming function.
(2)The product can be 3-stage dimming control, to choose from: brightness 100%--> Dimming brightness (10%, 20%, 30% optional) --> Off.
(3) Provides two delay times:Full bright delay time and half brightness time;
(4) Daylight detection threshold and sensing distance adjustable;
If the set light vale (10Lux, 30Lux, 50Lux) is less than the brightness off the ambient natural light, the lamp does NOT enter the semi-brightn state (10%,20%,30%) automaticallly.
When there is human eners the room/detection range, the sensor senses the movement of the human body, the light will be 100% full brightness, and the human leaves, the full light delay time after the light will enter half brightness(10%,20%,30%), half light delay time off.
Technical Information:
Note:
model suffix can be added X, X can be blank, A, B or C.
A means no Photocell sensor.
B means with Photocell sensor
C means motion sensor.
| Power | 240W | 320W |
| Model | CL-LD-240W-S | LD-320W-S |
| Luminous Flux | 26000lm | 39000lm |
| Replacement | HPS 600-700W | HPS1000W |
| ETL DLC | YES |
| Light Source | SMD LED |
| Luminous Efficacy | 130lm/w |
| Operation Temp | -40 to +45℃ |
| CCT | 2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CW |
| CRI | >80 |
| Life Span | 50,000 hours at 25℃ |
| Voltage | 100-277VAC/50-60Hz, 200-480VAC/50-60Hz |
| Driver | Conventional power supply ,Time control power supply ,3 in 1 dimming power supply |
| With sensor | Timmer Control,Motion Sensor,Photocell Sensor,3 in 1 dimming, |
| Wifi Zigbee Connect,photocell+timmer control,3 step dimming, |
| GPRS,3G/4G,Blue tooth,PLC and smart motion sensor. |
| Microwave sensor | Detect human- brightness 100%, microwave sensitivity 75%, hold time 5 minutes, |
| default setting | start illumination 50LUX, continuous brightness 30%, the duration of 30 minutes |
| Beam Angle | TYPE Ⅲ-M ,TYPE Ⅳ-M (Type 2 and Type 5 optional) |
| PF | >0.95 |
| IP | 65 |
| Warranty | 3/5Years |
| Installation way | Slipfitter Mount |
| Lamp Paint | Bronze |
| Photocell | NO (Optional) |
Optional Accessories:
